Here is the second group of Christmas trees I made for our mantel this year.

I haven’t put up any of the trees yet – I love Christmas, and I’m definitely catching myself singing along to the carols in stores, but I’m trying to enforce a little discipline at home. Besides, we’ve had some warm spells this November, so I might as well finish soaking up fall before celebrating winter!

I was originally inspired to make a Christmas forest by the exquisite handmade Christmas trees by Shauna Mailloux, and for today’s trees, I found inspiration from the charming felt trees made by Rebecca at the Crafted Sparrow.

Just to remind you, here’s a picture of the first decorative Christmas trees I made. They were all quick projects created by winding yarn or trim around the cone.

Make your own decorative Christmas trees. Easy, inexpensive, and unique holiday decor!

For the felt trees, I also used homemade tree bases formed by rolling used cardboard boxes into cones of varying sizes.

As predicted, this second group of trees did take longer to make, but they were still very doable projects and absolutely worth the effort!

Felt triangle trees
These trees were the ones inspired by the felt trees made by Rebecca at the Crafted Sparrow.

I made the first tree using 3 full sheets of felt for a 14.5″ tall cone. I started by cutting two inch strips of felt and then cutting those into triangles (top left picture below). I saved a little felt to hide the cardboard under the first row and a small circle to finish off the top.

Because this tree sat flat on the ground, rather than on a trunk, I wrapped some strips of felt around the bottom 2 inches of the tree, so the cardboard wouldn’t show under the first row of triangles (top right picture below). I then glued triangles, overlapping slightly, in a row around the cone (bottom left picture below). Hot glue worked better than white glue, which just got absorbed into the felt. I worked the same way all the up the tree and capped off the top with a small circle of felt.

A pretty tree, and I love this dark blue-grey color of felt.

DIY felt Christmas tree.

The second felt triangle tree sits up on a glass bottle for a trunk. I’m thinking of filling it with some silver and grey beads. This tree was made the same way, except the first row of triangles hangs off the bottom of the cone (left picture below), since there is a trunk. For some variety, I made a narrower shaped cone for the white tree, and I added also some small pearl beads I had in my craft stash (right picture below). The cone for this tree is 13″ tall and used just over two sheets of felt.

DIY felt and bead Christmas tree with a glass base.

;

Felt circle tree

My friend and partner in crafting (crime), Ari, spotted these sweet felt trees from Land of Nod (and let’s be honest, what isn’t sweet at Land of Nod?!). The circles were not so hard to cut out – I used a Sharpie to trace a spool on a sheet of felt (top left picture below) and then pinned it to a second one, to cut out two sheets at once (top right picture below). This little tree used just over two sheets of felt.

Because the tree sat up on a base, I glued the first row of circles hanging just off the bottom of the cone (bottom left picture below). The cone was wider than the others, to change things up, and I decided to put a base on it, which was a large tin can wrapped in brown felt (bottom left picture below).

;

Another cutie to add to the forest!

DIY felt circle Christmas tree inspired by Land of Nod.

Here are some more pictures of the new felt trees and some of their old friends:

I am hoping to get around some more trees this season, but we’ll see how things go, with some stockings and teacher gifts still on the to-do list. I’m enjoying getting warmed up for the season!

“Jewels”

I shared this project at:

Centsational Girl’s holiday Link Party

Don’t get me wrong, I pretty much love craft projects just for the joy of making something with my own hands. But, to be honest, there are DIY projects that look just like you DIY’ed them, those that turn out as well as something you would buy, and then there are those that turn out to be truly beautiful, unique pieces of art. When I saw these handmade Christmas trees by Shauna Mailloux, I knew they fell into the last category, and I couldn’t wait to try them myself.

There are a hundred ways you could customize these trees. I used a few of Shauna’s ideas and came up with some of my own, browsing the craft store and my own odds and ends. I encourage you to try making your own unique holiday creations!

Make your own decorative Christmas trees. Easy, inexpensive, and unique holiday decor!

Like Shauna, I made my own tree bases by rolling cardboard boxes into cones of varying sizes.

Here are the first few trees I made. (With some luck,) I’ll add more later. I call these the “instant gratification” trees, because they were quick and easy. The “blood, sweat, and tears” trees will take a little longer…

Feather boa tree
This is my absolutely favorite of Shauna’s trees. It has a great funky elegance. When i was looking for supplies, I wasn’t sure about the quantities of materials needed, so I’ll list what I used to help you with your sourcing.

For this tree, I used 4ft of feather boa for a 14″ tall tree. It was simple to tuck one end of the boa in the top of the cone and wind it around, securing it with some hot glue once in a while. You can leave quite a bit of space between the rows, since the boa is so fluffy. I used a white cardboard cone, in case any cardboard showed in between the rows.

White feather boa Christmas tree.

Eyelash yarn tree
I loved the look of the white boa, but all the other boas at the craft store came in rather non-Christmasy colors. Luckily, this glitter eyelash yarn gives a very similar look!

One ball (0.88oz ; 39 yards) of glitter eyelash yarn covered a 12″ tree. I used two strands (pulled the yarn from both ends) twisted together, as it’s actually very fine yarn.  The technique is the same – tuck the end in the top and wind the yarn around, but since the yarn is so fine, I used the toothpick end of my tree topper to help push it inside the cone.

I absolutely love this one, too!  The tinsel strands reflect light and make it sparkle.  I’ll show how to make the little beaded tree topper below.

Glitter eyelash yarn Christmas tree with a beaded topper.

And then, there were two!

The fluffy ones! Feather boa tree and glitter eyelash tree.

Cording and braid trees

Not just for Marie Antoinette’s curtains, the trim section of our local craft store had some more great finds.  I found some cord in red and also these green and gold braids. Because of the lacy edges of the green and gold braid, I spray-painted the cardboard cones to match first. The rest is the same as the others, sticking the end in the top of the cone and winding around, with hot glue applied along the way.

In terms of supplies,

• the red cord tree used 2.5 yards for a 9.5″ tall cone
• 3 yards of the green covered a 9.5″ high cone, with a few inches to spare
• the gold is a bit narrower, and I used 4 yards to cover a 12″ tree, with some space between the rows, as shown

DIY Christmas trees made with braided trims.

Beaded tree-topper

I also got this idea from Shauna’s trees, though she didn’t explain exactly how she made it, so here’s what I did.

• Glue a large bead onto the end of a toothpick (top left picture below)
• Spread tacky glue over the surface of your large bead (top right picture below)
• Dip your glue-y tree topper into a bowl of small beads (bottom left picture below)
• Insert the toothpick into the top of your tree.  Ta-da! (bottom right picture below)

I have some ideas for more tree toppers, though I think that many of the trees look great on their own, too.

Fa-la-la-la-la-la-la-la-la!

“Jewels”