Pillowcase Dresses for Girls

Posted on June 19, 2013 by jewelsathome

These little “pillowcase” dresses have been catching my eye for a while. The style is very simple to sew, and the results are so cute! Not to mention that for growing kids, you can’t beat a style that will grow along with them!

For my birthday, Steve and I went to an amazing fabric store in Berkeley, Stone Mountain and Daughter, and among other treasures, I found this cute Japanese-style rabbit print.

I have a weakness for anything rabbit-themed for my little nieces, who were born in the year of the rabbit. You may remember the custom gift bags and silhouette Christmas ornaments that I made for them.

For the basic pattern, I used this tutorial from the Aesthetic Nest. I did alter the pattern in a couple of ways.

Here’s what you will need to make your own unique designs in size 2T:

1/2 yard of 45″ quilting cotton for the main fabric, if the print has no direction or runs across the width of the fabric. You will need 2/3 of a yard, if the pattern runs the length of the fabric.
1/4 yard of solid fabric for the tie
bias binding to match your main fabric
thread to match your main fabric and tie fabric

Instructions:

Prewash and iron your fabric
Fold the main fabric in half and cut into to two pieces that are 18″ wide x 22″ long each. You can see here why they’re called pillowcase dresses. It would be fun to find some pillowcases with a great design for dresses, though the pattern is usually oriented the other direction.
Cut armholes from the top corners: 4″ from the top and 2″ from the side, as show below:

Girl's pillowcase dress tutorial. Sweet and simple design | Jewels at Home

Cut armholes from the top corners of the front and back panels.

Next, join the front and back panels using a French seam:

First, with wrong sides together, sew a 1/4 inch seam along the sides of the dress (top left picture below).
Iron the seam open, turn the dress inside out, and sew a 3/8″ seam with the wrong sides facing (top right picture below).
Turn the dress right side out again, and you can see your dress taking shape (bottom picture below)!

To finish off the edges, start with adding bias binding to the armholes. I didn’t get good pictures of this with the dresses, so the picture below is from the pillowcase top I made for myself:

Open the folded bias binding and line up one edge to the edge of the armhole on the right side. Stitch along the crease nearest the edge.
Clip the seam allowance in the curve, to allow it to lie flat. Fold the binding to the wrong side and iron the binding flat.
Sew around the armhole to sew down the binding.

For the neck casing:

zig-zag the top edges of both panels, unless you were able to line the selvedge up here (top picture below)
Fold down 1 3/4″ from the top edge and iron (second picture below)
Fold back up 1/4″, so that you have a 1/2″ casing (third picture below)
Sew along the bottom edge of the casing and voila (bottom picture below)!

For the bottom hem, fold up 2″ towards the inside of the dress and fold back under 1/4″. Iron and stitch the hem in place.

For the tie, I started with two 3″ thick strips of fabric, each 42″ wide.

I joined the strips end to end (top left picture below)
I the folded open the joint and sewed the seam allowances down (top right picture below)
I finished the tie all the way around by folding under a 1/8″ twice and sewing it down. I didn’t measure this part exactly, but I did put a piece of painter’s tape down on my machine, to make sure I was keeping approximately the same finished width all the way (bottom picture below).

And here are the finished dresses! So cute!

Pillowcase dress tutorial | Jewels at Home

Pretty dress for a pretty girl!

My cutie niece in her birthday dress!

Happy 2nd birthday, girls!

Auntie “Jewels”

3-D Balloon Applique

Posted on August 23, 2012 by jewelsathome

My craft projects tend to come in waves. I find a great idea and love creating variations on it. At the moment, this idea is fabric appliques for kids’ clothes. I made tie t-shirts for the boys, co-hosted a onesie decorating party for my friend Nicola, and most recently, I decorated this cute hoodie sweatshirt for our neighbor across the street, who is turning 3!

3-D balloon applique on a sweatshirt.

Here’s what you’ll need

sweatshirt or t-shirt
fabric
iron-on applique material, such as Heat ‘n Bond
batting
ribbon

Here’s how to make your own puffy applique:

Draw your shape in two sizes – one the size of the finished piece and one about 1/4″ smaller all around, as shown below.

Following the instructions detailed for the tie t-shirts and onesie decorating party, create a large shape with the fusible applique material on the back and cut the small shape out of batting. The batting will flatten out when you iron it down, so use enough to make it a little thicker than you want your finished shape.

Place your applique on the shirt, first the batting and then the fabric centered on top. I also tucked some ribbon under the fabric, to make the string for the balloon.

3-D applique tutorial from Jewels at Home.

Place the batting on your shirt, and layer the fabric on top.

Iron and sew your applique in place according to the instructions for the tie t-shirts and onesie decorating party. I also sewed down the ribbons and tied a bow, which I also sewed in the center. I left the loops of the bow and the bottom of the ribbons free. My balloons didn’t turn out as puffy as I had envisioned, since they got flattened when they were ironed down, so I would use thicker batting next time.

3-D balloon applique

I’ve got a few more applique projects to finish up, and then I need to move on to something else!

“Jewels”

Fabric-covered Hairband Tutorial

Posted on August 10, 2012 by jewelsathome

Here’s a quick and easy project… And that’s a good thing for me, because after I cut my hair short recently, I realized that I couldn’t brush my teeth without my cute new style falling into my face. I literally ran next door to my craft studio and whipped up this hairband, so I could get ready for bed.

You’ll need

wide elastic – I used a little under 2′ of 3/4″ wide elastic.
fabric – just a small strip about 22″x 2.5″
needle and thread
optional but handy! Chopstick and a large safety pin

1) Cut your elastic so that it fits comfortably around your head while gently stretched with an inch overlapping

2) Cut your fabric about the same length as your unstretched elastic and 2.5″ wide

3) Fold the fabric lengthwise with right sides together. Fold down a hem on either end and stitch with a 1/2″ seam allowance.

Fabric hairband tutorial.

4) Turn the fabric cover right side out. My mom taught me the trick of using a chopstick to help turn narrow things right side out. What do people without chopsticks do??

5) Thread the elastic through the fabric cover. My mom taught me another trick: use a large safety pin (I used a diaper pin) to help pull elastic or cording through a narrow sleeve. It gives you something to grasp on to!

6) sew the ends of the elastic securely together with a one inch overlap.

7) sew the ends of the fabric cover closed by hand.