Yup, I have become one of those people who does a themed Christmas each year. I am still not sure if this is a sign of greatness of madness! While I admit to having accumulated many boxes of decorations, I … Continue reading
“At first I was afraid… I was petrified…” and now I’m totally obsessed with macrame! With apologies to Gloria Gaynor… once you learn a few basic knots, there are so many possible macrame projects!
You might remember that for my first plant hanger, I used heavy rope and simple overhand knots. I added gathering knots in colored yarn. For my next projects, I learned the square knot and added some beads.
This project uses some silver-colored beads, and the hanger is formed with short stretches of three square knots. I used sport weight cotton yarn (similar to this yarn) which I already had. The advantage is that it’s thin enough to thread the beads onto, but the result is quite thin, so it will be best for a smaller plant.
This next project uses some braided candle wick. It lies flat, which makes the square knots much easier and neater. I did two longer stretches of square knots at the top and then shorter stretches to form the hanger. The twine is heavier than the cotton yarn, and I really like how it lies flat. I’ll definitely be doing more projects with this string!
By the way, you may have noticed the same (fake) plant in both these hangers. We’re on vacation in Toronto, and I ended up buying a “plant model” to help with my projects. 😂
Next macrame projects coming up: wave knots, colored string, and dip-dyeing (I think I will save that for when I get home…)! I always need to have a project to work on, and this has turned out to be a great one for traveling, because it is so compact. Hope you will give it a try.
Everything old is new again! I’m visiting my dad and fantasizing about magically unearthing some old macrame projects from the 70s. Meanwhile, I’m trying my hand at making some plant hangers. This macrame obsession pairs perfectly with my newfound love of plants!
Tying knots in string shouldn’t be that complicated, but I was nervous getting started, so I chose the simplest project I could. Using some heavy cotton rope leftover from hanging a birthday piñata, I based my plant hanger off of these instructions.
Because the rope was so thick, I chose to use a gathering knot in blue cotton yarn rather than tie a heavy knot with the rope at the top and bottom.
Being a busy mom, the first chance I had to work on this project was on a plane! Luckily, the tab that holds up the tray table works perfectly for attaching the loop at the top;)
And here’s how it looks planted with Golden Pothos.
Stay groovy and green!
This year, the boys and I created these portraits for Steve and their grandfathers. You know by now that I have an endless supply of scrapbook paper, which I used to create the letters. The boys were really good sports (they aren’t always!) with taking the pictures, and I love the final products.
I printed individual pictures and put them in a frame with three openings and a matte that the boys signed.
Wishing the best to all the hard-working and loving fathers out there!
It’s graduation season! Somehow (well, I guess we know how), I ended up with boys graduating from middle school, elementary school, and Kindergarten all in one year. This calls for some crafting. I decided to make graduation leis for the boys and their friends using ribbon.
I researched a ton of ideas, which you can browse on my Pinterest page. Some of those ideas are definitely for the expert level lei-maker, and I am a humble beginner. However, I did find inspiration for something that is both easy and pretty over at Sakacon.com. These spiral ribbon leis don’t require advanced skills, but they do take some time. I modified the method a little, and I love how you can mix and match so many ribbons for infinite ideas!
- wide ribbon 7/8″ to 1.5″ (8-10 yards). This is the ruffle-edge ribbon I used.
- narrower accent ribbon(s) 3/16″ to 1/2″ (same yardage). This is the picot ribbon I used.
- embroidery floss to match the accent ribbon
- clear nail polish to finish the ends of the ribbon
- needle, scissors
First, go to your local craft store and go crazy! I actually feel like I have accomplished a project just by getting supplies (…but I realize this isn’t quite true). Since the design of the leis is simple, you can add a lot of detail by picking interesting ribbons. You can see i found some ribbons with ruffled edges and picot ribbon (apparently this is what you call the ribbon with the little loops in the side) that really make your “flowers” look more realistic. For fun, I bought some rainbow stripe ribbon, and the possibilities are really endless.
To make the lei, thread three strands of embroidery floss onto your needle. I used about 18″ of floss at a time. Tie a secure knot at the end of your floss.
The Sakacon version has a long tail you can use to tie the lei on with a bow. I decided to make a continuous round lei, because I thought it would be more comfortable for the boys. I still staggered the length of the wide and narrow ribbons – ie left a long tail of the wide ribbon before starting my lei – so there would not be an obvious join in the lei.
I lined up the narrow ribbon to one side of the wide ribbon, folding under the edge to avoid fraying, and sewed a few stitches in place to secure it. I then started doing a long running stitch, with stitches every centimeter (3/8″) or so.
Once you have sewn a few stitches, pull the thread to make the ruffles and guide them into a spiral shape to look like a chain of flowers. This really feels like magic!
You basically continue this for a long, long time. To make the lei a continuous loop, I cut off the wide ribbon first, and picked up the section of wide ribbon I had left as a “tail” at the beginning, continuing I until I reached the start of the narrow ribbon.
I bought spools of craft ribbon, which comes in 3-6 yard sections, so there are several joins in the lei. These aren’t visible, because the ribbons are staggered, and there are so many ruffles. At the ends of the ribbon, I used clear nail polish on the wide ribbon and just folded under the ends of the narrow ribbon. I also changed embroidery floss a few times, being sure to tie secure knots and hide the ends.
Behold! Here are the finished leis. I’m still making more and will add the pictures when they are done, to give you more ideas for ribbon combinations. I can’t wait to share them with my boys and their friends in a few more weeks!
Can’t draw? Good! Neither can I. This is project for people like us! We created a basement guest room with our renovation a couple of years ago, and with my sister coming to visit soon, I wanted to put some … Continue reading
You’ve probably seen the popular mercury glass accessories out there as well as the DIY tutorials. I have been waiting to try this out, and it was really fun!
I made these for a party we have coming up, and – excitement!! – I am also helping a friend plan wedding decorations, so there will be more to come. Enjoy some tips and pictures:
I found quite a few different variations in instructions, which I will discuss a bit.
- Types of paint: the most popular seems to be Krylon Looking Glass. It took several coats to get this finish, and I think I could actually have done even more, but I want to be able to put votive candles inside and still have some light shine through. I also added one coat of gold paint in the middle to warm up the color a bit.
- Spraying water-vinegar mix before painting or after painting: I preferred to spray the water-vinegar mix on before spraying, which blocks the paint from sticking to the glass. I did still rub it off a little after, but I think you would have to rub a lot harder, if you sprayed the water on after the paint.
- Spraying inside or outside: Looking Glass paint is intended to be sprayed on the inside, so the glass itself adds to the reflective finish. However, to make the vases more useful (ie able to hold things inside), I chose to paint on the outside.
Here’s how one of my vases looks in front of some mercury glass candlesticks I bought from Pier 1. It makes me want to warm up my colors more next time by adding more layers of gold paint.
I’d also like to try again with some rose gold or copper paint!
I love hosting parties because of the great food and company. And, to be honest, entertaining is also exactly the kick in the behind I need to work on fun projects around the house. We’re hosting a parent social in a few weeks, and I’m working on some decorations that will be festive and a touch glamorous, to help us all escape for a few hours from the daily routine.
One project I was excited to do was this “CHEERS” party banner. You could use this idea with any saying for all kinds of occasions, like weddings or birthdays. If you want to make one for your next shindig, here’s how I did it.
- Gold contact paper
- Tissue paper
- Cut out the cardstock with points at the bottom
- Cut out letters from the gold contact paper (remember to sketch your letters backwards!) and center on the cardstock
- Punch holes in the top corners of the cardstock
- String on to twine
- Add tissue paper tassels (I used these instructions)
Here are a couple more pictures of our fun party banner!
Can’t think of a better way to sign off than saying “Cheers!”
These little jars are so cute for teacher gifts, hostess gifts, and just-because gifts! It takes a little patience to collect the jars, but then it is pretty straight-forward to put everything together. Materials: empty jars gold spray paint metallic … Continue reading
The new pine cone tree fits right in with his felt and feather cousins!
I might paint it another time, but for this year’s Scandinavian-inspired theme, the natural finish seems perfect! It took a while to put together, and Steve took the opportunity to make about two zillion conifer-inspired puns, so I have multiple reasons to be glad that project is over:)… but I’m really happy with the results!